Nucleophile is a chemical species that donates an electron pair to an electrophile to form a chemical bond in relation to a reaction. All molecules or ions with a free pair of electrons or at least one pi bond can act as nucleophiles. Because nucleophiles donate electrons, they are by definition Lewis bases. Nucleophilic describes the affinity of a nucleophile to the nuclei. Nucleophilicity, sometimes referred to as nucleophile strength, refers to a substance's nucleophilic character and is often used to compare the affinity of atoms. Neutral nucleophilic reactions with solvents such as alcohols and water are named solvolysis. Nucleophiles may take part in nucleophilic substitution, whereby a nucleophile becomes attracted to a full or partial positive charge.
In general, in a row across the periodic table, the more basic the ion (the higher the pKa of the conjugate acid) the more reactive it is as a nucleophile. In a given group, polarizability is more important in the determination of the nucleophilicity. Thus, the easier it is to distort the electron cloud around an atom or molecule, the more readily it will react; e.g., the iodide ion (I−) is more nucleophilic than the fluoride ion (F−).
Many schemes attempting to quantify relative nucleophilic strength have been devised. The following empirical data have been obtained by measuring reaction rates for a large number of reactions involving a large number of nucleophiles and electrophiles. Nucleophiles displaying the so-called alpha effect are usually omitted in this type of treatment.
This free-energy relationship relates the pseudo first order reaction rate constant (in water at 25 °C), k, of a reaction, normalized to the reaction rate, k0, of a standard reaction with water as the nucleophile, to a nucleophilic constant n for a given nucleophile and a substrate constant s that depends on the sensitivity of a substrate to nucleophilic attack (defined as 1 for methyl bromide).
This treatment results in the following values for typical nucleophilic anions: acetate 2.7, chloride 3.0, azide 4.0, hydroxide 4.2, aniline 4.5, iodide 5.0, and thiosulfate 6.4. Typical substrate constants are 0.66 for ethyl tosylate, 0.77 for β-propiolactone, 1.00 for 2,3-epoxypropanol, 0.87 for benzyl chloride, and 1.43 for benzoyl chloride.
where N+ is the nucleophile dependent parameter and k0 the reaction rate constant for water. In this equation, a substrate-dependent parameter like s in the Swain–Scott equation is absent. The equation states that two nucleophiles react with the same relative reactivity regardless of the nature of the electrophile, which is in violation of the reactivity–selectivity principle. For this reason, this equation is also called the constant selectivity relationship.
or (not displayed) ions based on Malachite green. Many other reaction types have since been described.
Typical Ritchie N+ values (in methanol) are: 0.5 for methanol, 5.9 for the cyanide anion, 7.5 for the methoxide anion, 8.5 for the azide anion, and 10.7 for the thiophenol anion. The values for the relative cation reactivities are -0.4 for the malachite green cation, +2.6 for the benzenediazonium cation, and +4.5 for the tropylium cation.
In the Mayr-Patz equation (1994):
The second order reaction rate constant k at 20 °C for a reaction is related to a nucleophilicity parameter N, an electrophilicity parameter E, and a nucleophile-dependent slope parameter s. The constant s is defined as 1 with 2-methyl-1-pentene as the nucleophile.
and a diverse collection of π-nucleophiles:
Typical N values with s in parenthesis are -4.47 (1.32) for electrophilic aromatic substitution to toluene (1), -0.41 (1.12) for electrophilic addition to 1-phenyl-2-propene (2), and 0.96 (1) for addition to 2-methyl-1-pentene (3), -0.13 (1.21) for reaction with triphenylallylsilane (4), 3.61 (1.11) for reaction with 2-methylfuran (5), +7.48 (0.89) for reaction with isobutenyltributylstannane (6) and +13.36 (0.81) for reaction with the enamine 7.
With E = -9.15 for the S-methyldibenzothiophenium ion, typical nucleophile values N (s) are 15.63 (0.64) for piperidine, 10.49 (0.68) for methoxide, and 5.20 (0.89) for water. In short, nucleophilicities towards sp2 or sp3 centers follow the same pattern.
In an effort to unify the above described equations the Mayr equation is rewritten as:
with sE the electrophile-dependent slope parameter and sN the nucleophile-dependent slope parameter. This equation can be rewritten in several ways:
Examples of nucleophiles are anions such as Cl−, or a compound with a lone pair of electrons such as NH3 (ammonia).
In the example below, the oxygen of the hydroxide ion donates an electron pair to form a new chemical bond with the carbon at the end of the bromopropane molecule. The bond between the carbon and the bromine then undergoes heterolytic fission, with the bromine atom taking the donated electron and becoming the bromide ion (Br−), because a SN2 reaction occurs by backside attack. This means that the hydroxide ion attacks the carbon atom from the other side, exactly opposite the bromine ion. Because of this backside attack, SN2 reactions result in a reversal of the configuration of the electrophile. If the electrophile is chiral, it typically maintains its chirality, though the SN2 product's absolute configuration is flipped as compared to that of the original electrophile.
An ambident nucleophile is one that can attack from two or more places, resulting in two or more products. For example, the thiocyanate ion (SCN−) may attack from either the S or the N. For this reason, the SN2 reaction of an alkyl halide with SCN− often leads to a mixture of an alkyl thiocyanate (R-SCN) and an alkyl isothiocyanate (R-NCS). Similar considerations apply in the Kolbe nitrile synthesis.
While the halogens aren't nucleophilic in their diatomic form (i.e. I2 is not a nucleophile), their anions are good nucleophiles. In polar, protic solvents, F− is the weakest nucleophile, and I− the strongest; this order is reversed in polar, aprotic solvents.
Carbon nucleophiles are often organometallic reagents such as those found in the Grignard reaction, Blaise reaction, Reformatsky reaction, and Barbier reaction or reactions involving organolithium reagents and acetylides. These reagents are often used to perform nucleophilic additions.
Enols are also carbon nucleophiles. The formation of an enol is catalyzed by acid or base. Enols are ambident nucleophiles, but, in general, nucleophilic at the alpha carbon atom. Enols are commonly used in condensation reactions, including the Claisen condensation and the aldol condensation reactions.
Examples of oxygen nucleophiles are water (H2O), hydroxide anion, alcohols, alkoxide anions, hydrogen peroxide, and carboxylate anions. Nucleophilic attack does not take place during intermolecular hydrogen bonding.
Of sulfur nucleophiles, hydrogen sulfide and its salts, thiols (RSH), thiolate anions (RS−), anions of thiolcarboxylic acids (RC(O)-S−), and anions of dithiocarbonates (RO-C(S)-S−) and dithiocarbamates (R2N-C(S)-S−) are used most often.
In general, sulfur is very nucleophilic because of its large size, which makes it readily polarizable, and its lone pairs of electrons are readily accessible.