In nuclear engineering, fissile material is material capable of sustaining a nuclear fission chain reaction. By definition, fissile material can sustain a chain reaction with neutrons of any energy. The predominant neutron energy may be typified by either slow neutrons (i.e., a thermal system) or fast neutrons. Fissile material can be used to fuel thermalneutron reactors, fastneutron reactors and nuclear explosives.
According to the Ronen fissile rule,^{[1]} for a heavy element with 90 ≤ Z ≤ 100, its isotopes with 2 × Z − N = 43 ± 2, with few exceptions, are fissile (where N = number of neutrons and Z = number of protons).^{[2]}^{[3]}^{[note 1]}
"Fissile" is distinct from "fissionable." A nuclide capable of undergoing fission (even with a low probability) after capturing a high energy neutron is referred to as "fissionable." A fissionable nuclide that can be induced to fission with lowenergy thermal neutrons with a high probability is referred to as "fissile."^{[4]} Although the terms were formerly synonymous, fissionable materials include also those (such as uranium238) that can be fissioned only with highenergy neutrons. As a result, fissile materials (such as uranium235) are a subset of fissionable materials.
Uranium235 fissions with lowenergy thermal neutrons because the binding energy resulting from the absorption of a neutron is greater than the critical energy required for fission; therefore uranium235 is a fissile material. By contrast, the binding energy released by uranium238 absorbing a thermal neutron is less than the critical energy, so the neutron must possess additional energy for fission to be possible. Consequently, uranium238 is a fissionable material but not a fissile material.^{[5]}
An alternative definition defines fissile nuclides as those nuclides that can be made to undergo nuclear fission (i.e., are fissionable) and also produce neutrons from such fission that can sustain a nuclear chain reaction in the correct setting. Under this definition, the only nuclides that are fissionable but not fissile are those nuclides that can be made to undergo nuclear fission but produce insufficient neutrons, in either energy or number, to sustain a nuclear chain reaction.^{[6]} As such, while all fissile isotopes are fissionable, not all fissionable isotopes are fissile. In the arms control context, particularly in proposals for a Fissile Material Cutoff Treaty, the term "fissile" is often used to describe materials that can be used in the fission primary of a nuclear weapon.^{[7]} These are materials that sustain an explosive fast neutron nuclear fission chain reaction.
Under all definitions above, uranium238 (^{238}
U
) is fissionable, but because it cannot sustain a neutron chain reaction, it is not fissile. Neutrons produced by fission of ^{238}
U
have lower energies than the original neutron (they behave as in an inelastic scattering), usually below 1 MeV (i.e., a speed of about 14,000 km/s), the fission threshold to cause subsequent fission of ^{238}
U
, so fission of ^{238}
U
does not sustain a nuclear chain reaction.
Fast fission of ^{238}
U
in the secondary stage of a nuclear weapon contributes greatly to yield and to fallout. The fast fission of ^{238}
U
also makes a significant contribution to the power output of some fastneutron reactors.
Actinides and fission products by halflife



Actinides^{[8]} by decay chain  Halflife range (y) 
Fission products of ^{235}U by yield^{[9]}  
4n  4n+1  4n+2  4n+3  
4.5–7%  0.04–1.25%  <0.001%  
^{228}Ra^{№}  4–6  †  ^{155}Eu^{þ}  
^{244}Cm^{ƒ}  ^{241}Pu^{ƒ}  ^{250}Cf  ^{227}Ac^{№}  10–29  ^{90}Sr  ^{85}Kr  ^{113m}Cd^{þ}  
^{232}U^{ƒ}  ^{238}Pu^{ƒ№}  ^{243}Cm^{ƒ}  29–97  ^{137}Cs  ^{151}Sm^{þ}  ^{121m}Sn  
^{248}Bk^{[10]}  ^{249}Cf^{ƒ}  ^{242m}Am^{ƒ}  141–351 
No fission products 

^{241}Am^{ƒ}  ^{251}Cf^{ƒ}^{[11]}  430–900  
^{226}Ra^{№}  ^{247}Bk  1.3 k – 1.6 k  
^{240}Pu^{ƒ№}  ^{229}Th^{№}  ^{246}Cm^{ƒ}  ^{243}Am^{ƒ}  4.7 k – 7.4 k  
^{245}Cm^{ƒ}  ^{250}Cm  8.3 k – 8.5 k  
^{239}Pu^{ƒ№}  24.1 k  
^{230}Th^{№}  ^{231}Pa^{№}  32 k – 76 k  
^{236}Np^{ƒ}  ^{233}U^{ƒ№}  ^{234}U^{№}  150 k – 250 k  ‡  ^{99}Tc^{₡}  ^{126}Sn  
^{248}Cm  ^{242}Pu^{ƒ}  327 k – 375 k  ^{79}Se^{₡}  
1.53 M  ^{93}Zr  
^{237}Np^{ƒ№}  2.1 M – 6.5 M  ^{135}Cs^{₡}  ^{107}Pd  
^{236}U^{№}  ^{247}Cm^{ƒ}  15 M – 24 M  ^{129}I^{₡}  
^{244}Pu^{№}  80 M 
... nor beyond 15.7 M years^{[12]} 

^{232}Th^{№}  ^{238}U^{№}  ^{235}U^{ƒ№}  0.7 G – 14.1 G  
Legend for superscript symbols 
In general, most actinide isotopes with an odd neutron number are fissile. Most nuclear fuels have an odd atomic mass number (A = Z + N = the total number of nucleons), and an even atomic number Z. This implies an odd number of neutrons. Isotopes with an odd number of neutrons gain an extra 1 to 2 MeV of energy from absorbing an extra neutron, from the pairing effect which favors even numbers of both neutrons and protons. This energy is enough to supply the needed extra energy for fission by slower neutrons, which is important for making fissionable isotopes also fissile.
More generally, nuclides with an even number of protons and an even number of neutrons, and located near a wellknown curve in nuclear physics of atomic number vs. atomic mass number are more stable than others; hence, they are less likely to undergo fission. They are more likely to "ignore" the neutron and let it go on its way, or else to absorb the neutron but without gaining enough energy from the process to deform the nucleus enough for it to fission. These "eveneven" isotopes are also less likely to undergo spontaneous fission, and they also have relatively much longer partial halflives for alpha or beta decay. Examples of these isotopes are uranium238 and thorium232. On the other hand, other than the lightest nuclides, nuclides with an odd number of protons and an odd number of neutrons (odd Z, odd N) are usually shortlived (a notable exception is neptunium236 with a halflife of 154,000 years) because they readily decay by betaparticle emission to their isobars with an even number of protons and an even number of neutrons (even Z, even N) becoming much more stable. The physical basis for this phenomenon also comes from the pairing effect in nuclear binding energy, but this time from both proton–proton and neutron–neutron pairing. The relatively short halflife of such oddodd heavy isotopes means that they are not available in quantity and are highly radioactive.
To be a useful fuel for nuclear fission chain reactions, the material must:
Thermal neutrons^{[13]}  Epithermal neutrons  

σ_{F} (b)  σ_{γ} (b)  %  σ_{F} (b)  σ_{γ} (b)  %  
531  46  8.0%  ^{233}U  760  140  16% 
585  99  14.5%  ^{235}U  275  140  34% 
750  271  26.5%  ^{239}Pu  300  200  40% 
1010  361  26.3%  ^{241}Pu  570  160  22% 
Fissile nuclides in nuclear fuels include:
Fissile nuclides do not have a 100% chance of undergoing fission on absorption of a neutron. The chance is dependent on the nuclide as well as neutron energy. For low and mediumenergy neutrons, the neutron capture cross sections for fission (σ_{F}), the cross section for neutron capture with emission of a gamma ray (σ_{γ}), and the percentage of nonfissions are in the table at right.
This page is based on a Wikipedia article written by authors
(here).
Text is available under the CC BYSA 3.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.