A pedestrian crossing (primarily British English) or crosswalk (American English) is a place designated for pedestrians to cross a road, street or avenue. Pelican crosswalks are designed to keep pedestrians together where they can be seen by motorists, and where they can cross most safely across the flow of vehicular traffic.
In Europe, the Zebra crossing is a common kind of crossing facility. The wording pedestrian crossing is used in some international treaties on road traffic and road signs, such as the Vienna Convention on Road Traffic and the Vienna Convention on Road Signs and Signals.
Marked pedestrian crossings are often found at intersections, but may also be at other points on busy roads that would otherwise be too unsafe to cross without assistance due to vehicle numbers, speed or road widths. They are also commonly installed where large numbers of pedestrians are attempting to cross (such as in shopping areas) or where vulnerable road users (such as school children) regularly cross. Rules govern usage of the pedestrian crossings to ensure safety; for example, in some areas, the pedestrian must be more than halfway across the crosswalk before the driver proceeds.
Signalised pedestrian crossings clearly separate when each type of traffic (pedestrians or road vehicles) can use the crossing. Unsignalised crossings generally assist pedestrians, and usually prioritise pedestrians, depending on the locality. What appears to be just pedestrian crossings can also be created largely as a traffic calming technique, especially when combined with other features like pedestrian priority, refuge islands, or raised surfaces.
Pedestrian crossings already existed more than 2000 years ago, as can be seen in the ruins of Pompeii. Blocks raised on the road allowed pedestrians to cross the street without having to step onto the road itself which doubled up as Pompeii's drainage and sewage disposal system. The spaces between the blocks allowed horse-drawn carts to pass along the road.
The first pedestrian crossing signal was erected in Bridge Street, Westminster, London, in December 1868. It was the idea of John Peake Knight, a railway engineer, who thought that it would provide a means to safely allow pedestrians to cross this busy thoroughfare. The signal consisted of a semaphore arm (manufactured by Saxby and Farmer, who were railway signaling makers), which was raised and lowered manually by a police constable who would rotate a handle on the side of the pole. The semaphore arms were augmented by gas illuminated lights at the top (green and red) to increase visibility of the signal at night. However, in January 1869, the gas used to illuminate the lights at the top leaked and caused an explosion, injuring the police operator. No further work was done on signalled pedestrian crossings until fifty years later.
In the early 20th century, car traffic increased dramatically. A reader of The Times wrote to the editor in 1911:
"Could you do something to help the pedestrian to recover the old margin of safety on our common streets and roads? It is heartrending to read of the fearful deaths taking place. If a pedestrian now has even one hesitation or failure the chance of escape from a dreadful death is now much less than when all vehicles were much slower. There is, too, in the motor traffic an evident desire not to slow down before the last moment. It is surely a scandal that on the common ways there should be undue apprehension in the minds of the weakest users of them. While the streets and roads are for all, of necessity the pedestrians, and the feeblest of these, should receive the supreme consideration."
According to Zegeer,
"Pedestrians have a right to cross roads safely and, therefore, planners and engineers have a professional responsibility to plan, design, and install safe crossing facilities."
Some Countries have specific criteria to provide pedestrian facilities; for example, they provide warrants, depending on local conditions, usually prioritized as follows:
a) Do nothing. In most places, the pedestrian doesn´t need specific facilities, as in low car flow streets, the pedestrians can cross (without priority) at any location.
b) providing central islands in the road. Provides the pedestrian with a safe place to wait at the middle of the road and advance as conditions permit.
c) Central reservation. A continuous (Usually raised) central reservation promotes safe pedestrian crossing in all the area, and reduce vehicle speed and head-on crash.
d)Zebra crossing. Provides a crossing in a low pedestrians flow area, if the pedestrian flow is high (as outside a school, train or bus terminal) the vehicle traffic will be severally affected by a significant number of pedestrians using the crossing, making necessary to provide traffic signals.
e) Traffic signals (Pelican in the U.K.). Used to control vehicle-pedestrian conflicts, not in intersections, and provided with pedestrians buttons. In this way, the vehicle signal turns red only if a pedestrian is trying to cross.
A staggered traffic signal. If the road is wide, (two or more traffic lines per traffic direction) and a central reservation exists or can be provided, traffic signals can be installed in a not aligned pair. This design permits to provide staggered green time for pedestrians (one side can be green while the other is red), The pedestrian needs to wait in the central reservation for the second crossing, improving the possibility to coordinate vehicle traffic between intersection, with a reduction of stops, fuel consumption, and reduced car emissions.
f) Pedestrian signal in the intersection. This facility is added in an intersection with a traffic signal, giving a clear orientation to a pedestrian when it is possible to cross. In some countries, is provision is obligatory in all traffic signals.
g)Pedestrian overpass or underpass. This facility eliminates the conflict between vehicular traffic and pedestrian, but need to be supported by some form of physical restriction preventing pedestrians from crossing at level, as they perceived the additional effort to climb the overpass.
Unmarked crossings may occur at any intersection, except at locations where pedestrian crossing is expressly prohibited. In the US these are called "unmarked crosswalks."
The simplest marked crossings may just consist of some markings on the road surface. In the US these are known as "marked crosswalks." In the UK these are often called zebra crossings, referring to the alternate white and black stripes painted on the road surface. If the pedestrian has priority over vehicular traffic when using the crossing, then they have an incentive to use the crossing instead of crossing the road at other places. In some countries, pedestrians may not have priority, but may be committing an offence if they cross the road elsewhere, or "jaywalk." Special markings are often made on the road surface, both to direct pedestrians and to prevent motorists from stopping vehicles in the way of foot traffic. There are many varieties of signal and marking layouts around the world and even within single countries. In the United States, there are many inconsistencies, although the variations are usually minor. There are several distinct types in the United Kingdom, each with their own name.
Some crossings have pedestrian traffic signals that allow pedestrians and road traffic to use the crossing alternately. On some traffic signals, pressing a call button is required to trigger the signal. Audible or tactile signals may also be included to assist people who have poor sight. In many cities, some or most signals are equipped with countdown timers to give notice to both drivers and pedestrians the time remaining on the crossing signal. In places where there is very high pedestrian traffic, Embedded pavement flashing-light systems are used to signal traffic of pedestrian presence, or exclusive traffic signal phases for pedestrians (also known as Barnes Dances) may be used, which stop vehicular traffic in all directions at the same time.
Footbridges or pedestrian tunnels may be used in lieu of crosswalks at very busy intersections as well as at locations where limited-access roads and controlled-access highways must be crossed. They can also be beneficial in locations where the sidewalk or pedestrian path naturally ascends or descends to a different level than the intersection itself, and the natural "desire line" leads to a footbridge or tunnel, respectively. However, pedestrian bridges are ineffective in most locations; due to their expense, they are typically spaced far apart. Additionally, ramps, stairs, or elevators present additional obstacles, and pedestrians tend to use an at-grade pedestrian crossing instead, sometimes jaywalking to avoid these obstacles. A variation on the bridge concept, often called a skyway or skywalk, is sometimes implemented in regions that experience inclement weather.
Some intersections display red lights in a all directions for a period of time. Known as a pedestrian scramble, this type of vehicle all-way stop allows pedestrians to cross safely in any direction, including diagonally.
Pedestrian refuges or small islands in the middle of a street may be added when a street is very wide, as these crossings can be too long for some individuals to cross in one cycle. These pedestrian refuges may consist of building new concrete traffic islands in the middle of the road; extending an existing island or median strip to the crosswalk to provide a refuge; or simply cutting through the existing island or median strip where the median is already continuous.
Another relatively widespread variation is the curb/kerb extension (also known as a bulb-out), which narrows the width of the street and is used in combination with crosswalk markings. They can also be used to slow down cars, potentially creating a safer crossing for pedestrians.
Pedestrian cross striping machines are special equipment professionally used to paint zebra lines on the intersections or other busy road sections. Because of the characteristics of zebra crossings, parallel stripes that are wide but not long, the striping machine is often a small hand-guided road marking machine, which can easily be made to change direction. There are differences between the engineering regulations in different countries. The marking shoe of a pedestrian cross striping machine, which determines marking lines’ width, is much wider than on other marking machines. A smaller marking shoe with wheels may be used to perform the road striping.
The section of road should be swept clean and kept dry. The painter first pulls a guiding line straight and fix the two ends on the ground. Then they spray or brush a primer layer on the asphalt or concrete surface. The thermoplastic paint in powder form is then melted into a molten liquid state for painting. Finally, the painter pulls or pushes the striping machine with the guide rod along the guiding line. As an alternative to thermoplastics, household paint or epoxy can be used to mark crosswalks.
Some crosswalks include unique designs, many of which take the form of artwork. These works of art may serve many different purposes, such as attracting tourism or catching drivers' attention.
Cities and towns worldwide have held competitions to paint crosswalks, usually as a form of artwork. In Santiago, a 2013 work by Canadian artist Roadsworth features yellow-and-blue fish overlaid on the existing crosswalk. Other crossings worldwide also feature some of Roadsworth's work, including a crosswalk in Montreal where the zebra stripes are shaped like bullets, as well as "conveyor belt" crosswalk in Winston-Salem, North Carolina. In Lompoc, California, several artists were commissioned to create an artwork as part of its "Creative Crossings" competition. Artist Marlee Bedford painted the first set of four crosswalks as part of the 2015 competition, and Linda Powers painted two more crosswalks in 2016 following that year's competition.
In Tbilisi, some Tbilisi Academy of Arts students and government officials jointly created a crossing that is designed to look like it is in 3D. A message on the white bars of the crosswalk reads, "for your safety." 3D crosswalk designs have also been installed in China, with a "floating zebra crossing" implemented in a village in Luoyuan County to boost tourism; a multicolored 3-D crossing installed in Changsha to catch drivers' attention; and another multicolored crossing in Sichuan that serves the same purpose as the colored Changsha crosswalk.
Colored crosswalks might have themes that reflect the immediate area. For instance, Chengdu had a red-and-white zebra crossing with hearts painted on it, reflecting its location near a junction of two rivers. In Curitiba, a crosswalk with its bars irregularly painted like a barcode served as an advertisement for a nearby shopping center, but was later painted over. A pedestrian scramble in the Chinatown section of Oakland, California, is painted with red-and-yellow colors to signify the colors of the flag of China.
Sometimes, different cities around the world may have similar art concepts for their crosswalks. Rainbow flag-colored crosswalks, which are usually painted to show support for the locality's LGBT cultures, have been installed in San Francisco; West Hollywood; Philadelphia; and Tel Aviv. Crosswalks painted like piano keyboards have been painted in Long Beach; Warsaw; and Chongqing.
For crosswalk safety, in the USA there is not much clarity regarding the need for a crosswalk to be marked or unmarked dues to advantages and disadvantages of both approaches, although each city might have its own rules.
In the United States, crosswalks are sometimes marked with white stripes, though many municipalities have slightly different methods, styles, or patterns for doing so. The designs used vary widely between jurisdictions, and often vary even between a city and its county (or local equivalents). There are two main methods for road markings in the United States, as mandated by the 2009 version of the Manual on Uniform Traffic Control Devices (MUTCD). Most frequently, they are marked with two parallel white lines running from one side of the road to the other, with the width of the lines being typically 12 to 24 inches (300 to 610 mm) wide. A third "stop line", which is about the same thickness and extends only across lanes going into the intersection, is usually also present. The stop line acts as the legally mandated stopping point for vehicles, and discourages drivers from stopping in the middle of the crosswalk. The other method involves the use of the more easily visible "continental stripes" (like the UK's zebra crossings), which are sets of multiple bars across the crosswalk itself that are perpendicular to the direction of crossing. These bars are typically 12 to 24 inches (300 to 610 mm) wide and are set 12 to 24 inches (300 to 610 mm) apart. Crosswalks can use a combination of two parallel white lines and continental stripes to create a "ladder" crosswalk, which is highly visible.
Marked crosswalks are usually placed at traffic intersections or crossroads, but are occasionally used at mid-block locations where pedestrian generators are present such as at transit stops, schools, retail, or housing destinations. In the United States, these "mid-block crossings" may include additional regulatory signage such as "PED XING" (for "pedestrian crossing"), flashing yellow beacons, stop or yield signs, or by actuated or automatic signals. Some more innovative crossing treatments include in-pavement flashers, yellow flashing warning lights installed in the roadway, or HAWK beacon—an overhead signal with a pair of red beacons above an amber beacon, when a pedestrian is detected or actuates the device it begins a sequence of amber flashing followed by a solid red, followed by a flashing red phase that allows motorists to proceed, only if the pedestrian(s) are clear of the travel way.
In the United States, crossing laws vary from state to state and sometimes at the local level. All states require vehicles to yield to a pedestrian who has entered a marked crosswalk. Legally speaking, in most states crosswalks exist at all intersections meeting at approximately right angles, whether they are marked or not. All states except Maine and Michigan require vehicles to yield to a pedestrian who has entered an unmarked crosswalk. To gain the right-of-way in some parts of Canada, however, the pedestrian holds out his hand in a position much like that used to shake hands, and steps off the curb. The province of Ontario enacted a law in 2016 that mandates that drivers and bicyclists come to a complete stop at pedestrian "crossovers"—ladder-style crosswalks that are sometimes designated with overhead signs or lights—as well as crosswalks with school crossing guards.
Three pedestrian traffic signals in New York City, in three different signal phases.
At crossings controlled by signals, the most common variety is arranged like this: At each end of a crosswalk, the poles which hold the traffic lights also have white "walk" and Portland Orange "don't walk" signs. These particular colors are used in North America (excluding Quebec) to provide conspicuity against the backdrop of red, yellow, and green traffic lights. As of the 2000 MUTCD, modern signals are mandated to use pictograms of an orange "upraised hand" and a white "walking man" rather than words; the hand/man display is the mandate as of the 2009 edition. On pedestrian signals displaying text, "don't walk" is spelled without an apostrophe so that it fits easily on the sign. Modern pedestrian signals can be incandescent, neon, fiber-optic, or LED, with the latter three displays typically utilizing less energy.
Regardless of whether pictograms or words are used, the MUTCD defines a steady "upraised hand" or "don't walk" signal as an indication that a pedestrian cannot enter the street in that signal's direction, while a steady "walking man" or "walk signal" indicates that pedestrians can start crossing the street toward that signal. The upraised hand or "don't walk" signals begin to flash during the pedestrian clearance interval when the transition to "don't walk" is imminent. This normally occurs several seconds before the light turns yellow, usually going solid orange when the traffic light turns yellow or red; however, the display can be turned into a steady hand or "don't walk" sign while the vehicular light is yellow, or while the vehicular signal is still displaying a green light. In intersections with "leading pedestrian intervals," the upraised hand or "don't walk" sign will continue flashing as the vehicular lights turn red and the other crossing(s) in the intersection display a walking man or "walk" sign. The vehicular traffic is then stopped in all directions for a short period of time before cross traffic is allowed to proceed. The 2009 MUTCD states that the flashing walking man or "walk" signals do not have meaning. The "flashing walk" indication was formerly used to delineate "watch out for turning vehicles" and is still in use in Washington, D.C.; however, as of the 2003 MUTCD, this was replaced by an optional "animated eyes" indication within the pedestrian signal display, which was placed in the MUTCD following a study that recommended the usage of the "animated eyes" signal.
A gridded "egg-crate visor" (U.S. Patent 3,863,251) is customarily placed in front of the lights to shield them from the sun and increase their visibility, but such visors can also be vulnerable to snow or ice accumulation on the screens, which in turn could block the pedestrian display. Pedestrian signals can also use a triangular-prism-shaped "cutaway visor" or "cap visor" (so named because the pitch of the visor, is shaped like a baseball cap), which mainly covers the top of the signal and the tops of the left and right sides; or a more rectangular-shaped "tunnel visor", which fully covers the left, right, and top sides of the pedestrian display.
In some cities in the US, other methods of pedestrian detection are being or have been tested, including infrared and microwave technology, as well as weight sensors built in at curbside. A 2000 study of these detectors in Los Angeles, Phoenix, and Rochester found that the infrared and microwave technologies both helped reduce conflicts between pedestrians and turning vehicles, as well as pedestrians starting during the "don't walk" phase.:38–39 Subsequent studies found that the efficacy of these sensors varied based on pedestrian traffic at the location where they were installed.:39–40
On fully actuated signals, or semi-actuated traffic signals, pressing the button to cross a smaller side street will cause an "instant walk signal". In most states, drivers only have to wait until the pedestrian has finished crossing the half of the crosswalk that the driver is driving on, after which the driver may proceed. However, in some states (such as Utah), if the driver is in a school zone with the lights flashing, the driver must wait until the entire crosswalk is clear before he may proceed.
Massachusetts allows an unusual indication variation for pedestrian movement. At signalized intersections without separate pedestrian signal heads, the traffic signals may be programmed to turn red in all directions, followed by a steady display of yellow lights simultaneously with the red indications. During this red-plus-yellow indication, the intersection is closed to vehicular traffic and pedestrians are given an "exclusive pedestrian interval", or a pedestrian scramble phase, in which they can cross any leg of the intersection, usually in whatever direction they choose. This replaces the extra pedestrian signal, but is in violation of the 2009 MUTCD. This practice is obsolescent but it remains in the Commonwealth's driver's manual.
In the United Kingdom and certain parts of the Commonwealth of Nations, animal names are often used to distinguish several types of such crossings. A zebra crossing consists of wide longitudinal stripes on road (perpendicular to the crossing route), with flashing amber Belisha beacons either side of the road. Pedestrians may cross at any time, while drivers must give way to pedestrians on the crossing. A pelican crossing is a signalised pedestrian-operated crossing. The motor traffic facing signals use a flashing amber instead of the conventional red and amber signal of the standard UK traffic signal sequence. A puffin crossing is signalised; however, unlike a pelican crossing which is a timed crossing, The puffin has sensors to detect people still on the crossing. The puffin also uses standard UK traffic signal sequence. A toucan crossing is used by bicycles as well as pedestrians, while a pegasus crossing is used by horse riders - hence having the button to operate the crossing higher up.
Zebra crossings are the only specific pedestrian crossing point that does not use light signals to control traffic movement. The other types of crossing use coloured pictogram lights, depending on the intended users of the crossing this will be a man, a bicycle or a horse.
In Spain, Great Britain, Germany and other European countries, 90% of pedestrian fatalities occur outside of pedestrian crossings. The highest rate is in the UK, which has fewer crossings than neighbouring European countries.
Continental crossings do not have the refinements of British ones, but they still indicate a good place to cross. 
In Switzerland, zebra crossings are marked in yellow.
In France, it is not mandatory that crosswalks exist. However, if there is one less than 50 meters away, pedestrians are obliged to use it.
Some countries in Europe, have used the word pedestrian crossing in some treaties, for instance in the sentence "A vehicle shall not overtake another vehicle which is approaching a pedestrian crossing marked on the carriageway or signposted as such, or which is stopped immediately before the crossing, otherwise than at a speed low enough to enable it to stop immediately if a pedestrian is on the crossing." from the convention on road traffic.
Such convention also consider that
In Europe, the pedestrian crossing is also dealt with European agreement supplementing the 1968 convention on road traffic done at Geneva on 1 May 1971 (Consolidated version including 1993, 2001, and 2006 amendments):
For marking, many European countries are aligned with treaties which states that:
The convention on road sign also provide warning models for signs and symbol. In those countries, the "pedestrian crossing sign" is on a blue or black ground, with a white or yellow triangle where the symbol is displayed in black or dark blue.
In Europe, the minimum width recommended for pedestrian crossings is 2.5 m (or 8 foot) on roads on which the speed limit is lower than 60 km/h (or 37 mph), and 4 m (or 13 foot) on roads wit a higher or no speed limit.
In Australia, the terminology pedestrian crossing is used.
Pictograms are standard on all traffic light controlled crossings. Like some other countries, a flashing red sequence is used prior to steady red to clear pedestrians. Moments after, in some instances, a flashing yellow sequence (for motorists) can begin indicating that the vehicles may proceed through the crossing if safe to do so; this is fairly uncommon however. In districts with heavier traffic warranting the use of a traffic light such as inner city areas, the equivalent of the US 'standard' configuration is used.
Zebra crossings are common in low traffic areas and their approaches may be marked by zig zag lines.
Reflector signposting is used at crossings in school zones, however given that most school crossings in the country are manned, these signs only serve as a warning to motorists.
Call buttons are installed at traffic lights with a dedicated pedestrian signal, and are used to bring up the pedestrian "walk" indication in locations where they function correctly. In the majority of locations where call buttons are installed, pushing the button does not light up the pedestrian walk sign immediately. One Portland State University researcher notes of call buttons in the US, "Most [call] buttons don’t provide any feedback to the pedestrian that the traffic signal has received the input. It may appear at many locations that nothing happens." However, there are some locations where call buttons do provide confirmation feedback. At such locations, pedestrians are more likely to wait for the "walk" indications.
Reports suggest that many walk buttons in some areas, such as New York City and the United Kingdom, may actually be either placebo buttons or nonworking call buttons that used to function correctly. In the former case, these buttons are designed to give pedestrians an illusion of control while the crossing signal continues its operation as programmed. However, in instances of the latter case, such as New York City's, the buttons were simply deactivated when traffic signals were updated to automatically include pedestrian phases as part of every signal cycle. In such instances these buttons may be removed during future updates to the pedestrian signals. In the United Kingdom, pressing a button at a standalone pedestrian crossing that is unconnected to a junction will turn a traffic light red immediately, but this is not necessarily the case at a junction.
Sometimes, call buttons work only at some intersections, at certain times of day, or certain periods of the year, such as in New York City or in Boston, Massachusetts. In Boston, some busy intersections are programmed to give a pedestrian cycle during certain times of day (so pushing the button is not necessary) but at off-peak times a button push is required to get a pedestrian cycle. In neighboring Cambridge, a button press is always required if a button is available, though the city prefers to build signals where no button is present and the pedestrian cycle always happens between short car cycles. In both cases the light will not turn immediately, but will wait until the next available pedestrian slot in a pre-determined rotation.
Some pedestrian signals integrate a countdown timer, showing how many seconds are remaining for the clearing phase. In the United States, San Francisco was the first major city to install countdown signals to replace older pedestrian modules, doing so on a trial basis starting in March 2001. The United States MUTCD added a countdown signal as an optional feature to its 2003 edition; if included, the countdown digits would be Portland Orange, the same color as the "Upraised Hand" indication. The MUTCD's 2009 edition changed countdown timers to a mandatory feature on pedestrian signals at all signalized intersections with pedestrian clearance intervals ("flashing upraised hand" phases) longer than seven seconds. With the MUTCD guideline allotting at least one second to cross 3 feet (0.91 m), this indicates that countdown timers are supposed to be installed on roads wider than 21 feet (6.4 m). The countdown is not supposed to be displayed during the pedestrian "walk" interval ("steady walking person" phase),
Some municipalities have found that there are instances where pedestrian countdown signals may be less effective than standard hand/man or "walk"/"dont walk" signals. New York City started studying the pedestrian timers in an inconclusive 2006 study but only started rolling out pedestrian timers on a large scale in 2011 after the conclusion of a second study, which found that pedestrian countdown timers were ineffective at shorter crosswalks. Additionally, a 2000 study of pedestrian countdown timers in Lake Buena Vista, Florida, at several intersections near Walt Disney World, found that pedestrians were more likely to cross the street during the pedestrian clearance interval (flashing upraised hand) if there is a timer present, compared to at intersections where there was no timer present. A study in Toronto found similar results to the Florida study, determining that countdown timers may actually cause more crashes than standard hand/man signals. However, other cities such as London found that countdown timers were effective, and New York City found that countdown signals worked mainly at longer crosswalks.
Pedestrian countdown signals are also used elsewhere around the world, such as in Buenos Aires, India, Mexico, Taiwan, and the United Arab Emirates. In Mexico City, the walking man moves his feet during the countdown. In Taiwan, all the crossings feature animated men called xiaolüren ("little green man"), who will walk faster immediately before the traffic signal will change. There is also always a countdown timer.
In some countries, instead of "don't walk", a depiction of a red man or hand indicating when not to cross, the drawing of the person crossing appears with an "X" drawn over it.
Some countries around the Baltic Sea in Scandinavia duplicate the red light. Instead of one red light, there are two which both illuminate at the same time.
In many parts of eastern Germany, particularly the former German Democratic Republic, the design of the crossing man (Ampelmännchen) has a hat. There are also female Ampelmännchen in western Germany and the Netherlands. Other countries also use unusual "walk" and "don't walk" pedestrian indicators. In southwest Yokohama, Kanagawa Prefecture, there are pedestrian signal lights that resemble Astro Boy. In Lisbon, some signals have a "don't walk" indicator that dances; these "dancing man" signals, created by Daimler AG, were created to encourage pedestrians to wait for the "walk" indicator, with the result that 81% more pedestrians stopped and waited for the "walk" light compared to at crosswalks with conventional signals.
In some areas, the signal timing technique of a Leading Pedestrian Interval (LPI) allows pedestrians exclusive access to a crosswalk, typically 3-7 seconds, before vehicular traffic is permitted. Depending on intersection volume and safety history, a normal right-turn-on-red (RTOR) might be explicitly prohibited during the LPI phase. LPI benefits include increased visibility and greater likelihood of vehicles yielding. LPI is among the tools being considered in the fatality-elimination toolkit of Vision Zero planners and advocates.
In certain circumstances, there are needs to install temporary pedestrian crossing signals. The reasons may include redirecting traffics due to roadworks, closing of the permanent crossing signals due to repairs or upgrades, and establishing new pedestrian crossings for the duration of large public events.
The temporary pedestrian crossings can be integrated into portable traffic signals that may be used during the roadworks, or it can be stand-alone just to stop vehicles to allow pedestrians to safely cross the road without directing vehicle movements. When using the temporary pedestrian crossings signals for roadworks, there should be consideration on signal cycle time. The pedestrian crossing cycles may add longer delay to the traffics which may require additional planning on road work traffic flows.
Depending on the duration and the nature of the temporary signals, the equipment can be installed in different way. One way is to use the permanent traffic signals mounted temporary poles such as poles in concrete-filled barrels. Another way is to use portable pedestrian crossing signals.
Pedestrian controlled crossings are sometimes provided with enhanced features to assist disabled people.
Tactile cones near or under the control button may rotate or shake when the pedestrian signal is in the pedestrian "walk" phase. This is for pedestrians with visual impairments. A vibrating button is used in Australia, Germany, some parts of the United States, Greece, Ireland, and Hong Kong to assist hearing-impaired people. Alternatively, electrostatic, touch-sensitive buttons require no force to activate. To confirm that a request has been registered, the buttons usually emit a chirp or other sound. They also offer anti-vandalism benefits due to not including moving parts which are sometimes jammed on traditional push-button units.
Tactile surfacing patterns (or tactile pavings) may be laid flush within the adjacent footways (US: sidewalks), so that visually impaired pedestrians can locate the control box and cone device and know when they have reached the other side. In Britain, different colours of tactile paving indicate different types of crossings; yellow (referred to as buff coloured) is used at non-controlled (no signals) crossings, and red is used at controlled (signalised) locations.
Crosswalks have adaptations, mainly for people with visual impairments, through the addition of accessible pedestrian signals (APS) that may include speakers at the pushbutton, or under the signal display, for each crossing location. These types of signals have been shown to reduce conflicts between pedestrians and vehicles. However, without other indications such as tactile pavings or cones, these APS units may be hard for visually impaired people to locate.
In the United States, the standards in the 2009 MUTCD require APS units to have a pushbutton locator tone, audible and vibrotactile walk indications, a tactile arrow aligned with the direction of travel on the crosswalk, and to respond to ambient sound. The pushbutton locator tone is a beep or tick, repeating at once per second, to allow people who are blind to find the device. If APS units are installed in more than one crossing direction (e.g. if there are APS units at a curb for both the north–south and west–east crossing directions), different sounds or speech messages may be used for each direction. Under the MUTCD guideline, the walk indication may be a speech message if two or more units on the same curb are separated by less than 10 feet (3.0 m). These speech messages usually follow the pattern "[Street name]. Walk sign is on to cross [Street Name]." Otherwise, the walk indication may be a "percussive tone," which usually consists of repeated, rapid sounds that can be clearly heard from the opposite curb and can oscillate between high and low volumes. In both cases, when the "don't walk" indication is flashing, the device will beep at every second until the "don't walk" indication becomes steady and the pedestrian countdown indication reaches "0", at which point the device will beep intermittently at lower volume. When activated, the APS units are mandated to be accompanied by a vibrating arrow on the APS during the walk signal.
The devices have been in existence since the mid-20th century, but were not popular until the 2000s because of concerns over noise. As of the 2009 MUTCD, APS are supposed to be set to be heard only 6 to 12 feet from the device to be easy to detect from a close distance but not so loud as to be intrusive to neighboring properties. Among American cities, San Francisco has one of the greatest numbers of APS-equipped intersections in the United States, with APS installed at 202 intersections as of October 2016. New York City has APS at 131 intersections as of November 2015, with 75 more intersections to be equipped every year after that.
APS in other countries may consist of a short recorded message, as in Scotland, Hong Kong, Singapore and some parts of Canada (moderate to large urban centres). In Japan, various electronic melodies are played, often of traditional melancholic folk songs such as "Tōryanse" or "Sakura". In Croatia, Denmark and Sweden, beeps (or clicks) with long intervals in-between signifying "don't walk" mode and beeps with very short intervals signifying "walk" mode.
On some pushbutton especially in Austria and Germany there is a symbolic relief showing the crossing situation for the visually impaired, so they can get an overview of the crossing.
The relief is read from the bottom up. It consists of different modules, which are put together according to the crosswalk. Each pedestrian crossing begins with the start symbol, consisting of an arrow and a broad line representing the curb. Subsequently different modules for traffic lanes and islands follow. The relief is completed with a broad line.
Modules for traffic lanes consist of a dash in the middle and a symbol for the kind of lane right or left of the dash, depending on the direction from which the traffic crosses the crossing. If a crossing is possible from both directions, a symbol is located on both sides. If the pedestrian crossing is a zebra crossing, the middle line is dashed. A traffic light secured crossing has a solid line.
A cycle path is represented by two points next to each other, a vehicle lane by a rectangle and tram rails by two lines lying one above the other.
Islands are represented as a rectangle, which has semicircles on the right and left side. If there is a pushbutton for pedestrians on the island, there is a dot in the middle of the rectangle. If the pedestrian walkway divides on an island, the rectangle may be open on the right or left side.
|zebra crossing||cycle path||bidirectional|
|zebra crossing||cycle path||right|
|zebra crossing||vehicle lane||right|
|zebra crossing||tram tracks||right|
|island with pushbutton||open to the left|
|island with pushbutton|
|traffic light||tram tracks||left|
|traffic light||vehicle lane||left|
|traffic light||cycle path||left|
|traffic lights||cycle path||bidirectional|
In Perth, Western Australia, an extended phase system called "Keywalk" was developed by the Main Roads Department of Western Australia in response to concerns from disability advocates about the widening of the Albany Highway in that city in the mid-1990s. The Department felt that extending the walk phase permanently on cross streets would cause too much disruption to traffic flow on the highway and so the Keywalk system was developed to allow for those who needed an extended green light phase to cross the road safely. A small electronic key adjusted the green/walk and flashing red/complete crossing phases to allow more time for the key holder to complete the crossing of the highway safely. The system was first installed at the junction of Albany Highway and Cecil Avenue. It is unclear what became of this system.
There are two types of crosswalk lights: those that illuminate the whole crosswalk area, and warning lights.
The Illuminating Engineering Society of North America currently provides engineering design standards for highway lighting. In the US, in conventional intersections, area lighting is typically provided by pole-mounted luminaires. These systems illuminate the crosswalk as well as surrounding areas, and do not always provide enough contrast between the pedestrian and his or her background.
There have been many efforts to create lighting scenarios that offer better nighttime illumination in crosswalks. Some innovative concepts include:
In areas with heavy snowfall, using in-pavement lighting can be problematic, since snow can obscure the lights, and snowplows can damage them.
In Finland, fences in the footpath approaching the crossing force pedestrians and bicycles to slow down to navigate a zigzag path, which also tends to force that user to look out for the train.
Pedestrian crossings across railways may be arranged differently elsewhere, such as in New South Wales, where they consist of:
In France, when a train is approaching, a red man is shown with the word STOP flashing in red (R25 signal).
When a footpath crosses a railway in the United Kingdom, there will most often be gates or stiles protecting the crossing from wildlife and livestock. In situations where there is little visibility along the railway, or the footpath is especially busy, there will also be a small set of lights with an explanatory sign. When a train approaches, the signal light will change to red and an alarm will sound until the train has cleared the crossing.
The safety of unsignalled pedestrian or zebra crossings is somewhat contested in traffic engineering circles.
Research undertaken in New Zealand showed that a zebra crossing without other safety features on average increases pedestrian crashes by 28% compared to a location without crossings. However, if combined with (placed on top of) a speed table, zebra crossings were found to reduce pedestrian crashes by 80%.
A five-year U.S. study of 1,000 marked crosswalks and 1,000 unmarked comparison sites found that on most roads, the difference in safety performance of marked and unmarked crossings is not statistically significant, unless additional safety features are used. On multilane roads carrying over 12,000 vehicles per day, a marked crosswalk is likely to have worse safety performance than an otherwise similar unmarked location, unless safety features such as raised median refuges or pedestrian beacons are also installed. On multilane roads carrying over 15,000 vehicles per day, a marked crosswalk is likely to have worse safety performance than an unmarked location, even if raised median refuges are provided. The marking pattern had no significant effect on safety. This study only included locations where vehicle traffic was not controlled by a signal or stop sign.
You must yield to pedestrians if your traffic signal is red or if it is red and yellow.
The Aga Khan Park is a landscaped garden that covers the space between and around the Ismaili Centre and the Aga Khan Museum, located in Toronto, Ontario, Canada, built by Aga Khan IV and formally inaugurated by Ontario Premier Kathleen Wynne on 25 May 2015.The park is built on traditional Persian and Mughal style of architecture. The park was designed by the Beirut-based landscape architect Vladimir Djurovic. Prior to finalizing his designs, Djurovic visited multiple gardens around the world, such as the Tomb of Humayun in New Delhi, India. He settled down upon a more "what you feel and smell and hear" vibe in attempt to maintain harmony amongst spirit, art, and nature.Belisha beacon
A Belisha beacon is an amber-coloured globe lamp atop a tall black and white pole, marking pedestrian crossings of roads in the United Kingdom, Ireland and in other countries historically influenced by Britain such as Hong Kong, Malta, and Singapore. The beacons were named after Leslie Hore-Belisha (1893–1957), the Minister of Transport who in 1934 added beacons to pedestrian crossings, marked by large metal studs in the road surface. These crossings were later painted in black and white stripes, thus are known as zebra crossings. Legally pedestrians have priority (over wheeled traffic) on such crossings. In 1948, the Central Office of Information produced a short film which showed the correct way to use a pedestrian crossing (without the stripes at this time).
Belisha beacons provide additional visibility to zebra crossings for motorists, primarily at night. The UK flash rate is 750 ms on, 750 ms off as per British Standard BS8442-2015, Para 12. Some crossings are set so that each beacon flashes alternately to the other side, but they often fall out of synchronization over time. This has been overcome by the built in sychronisation and high visibility features included in belisha beacon patent GB2549455. GB Beacons with an outer ring of flashing amber LED lights, preferred for their brightness and low electricity consumption, are replacing traditional incandescent bulbs in many areas.
In 2015 the first solar powered belisha beacon requiring no mains cabling was introduced using energy saving technology in patent GB2519445.To be legally compliant, every zebra crossing must be equipped with two Belisha beacons. In the UK, in cases where there is a traffic island or central reservation in the road, the traffic authority can opt whether to place one or more beacons centrally.Since the introduction of new regulations in 1997 the number of zebra crossings and Belisha beacons has fallen in the northern counties of England, being replaced by pelican crossings or puffin crossings, with pedestrian-controlled traffic signals; a waiting pedestrian can stop vehicular traffic by pressing a button and waiting for the pedestrian signal of a red and green man to change to green. The green man can be accompanied by a green bicycle to indicate that the crossing is designated for pedestrians and cyclists; continuing the bird-name theme, this type of crossing is called a toucan crossing, as in, 'two can' cross. Another variation is the pegasus crossing where the pedestrian is accompanied by a green horse to indicate that the crossing is designated for pedestrians and horses, for example, at Hyde Park Corner, London.
The first Belisha beacons were erected in the London authorities areas and, following the Road Traffic Act 1934, were rolled out nationally in 1935.Birchmount stop
Birchmount is a surface light rail transit (LRT) stop to be constructed on Line 5 Eglinton, a new line that is part of the Toronto subway system. It will be located in the Ionview neighbourhood at the intersection of Eglinton Avenue and Birchmount Road. It is scheduled to open in 2021.
Metrolinx is planning to locate the stop in the middle of Eglinton Avenue on the east side of its intersection with Birchmount Avenue. The stop will have parallel side platforms to be accessed from the pedestrian crossing on the east side of the signalized street intersection. As of December 2015, Metrolinx says these plans are still subject to change.Bridgeport, Nevada County, California
Bridgeport (also: Nyes Landing and Nye's Crossing) is a former settlement on the Yuba River in Nevada County, California, 2 mi (3.2 km) from the town of French Corral. Its elevation is 567 ft (173 m) above sea level.It is notable for the Bridgeport Covered Bridge, a national and state historic landmark, used as a pedestrian crossing over the South Yuba River.
The South Yuba River State Park is adjacent.Dykebar railway station
Dykebar was a railway station in the Dykebar area to the south of Paisley, Renfrewshire, Scotland. The station was originally part of the Paisley and Barrhead District Railway . The line was opened in 1897 and used by coal trains until the 1960s but none of the stations including this one opened for passenger travel.
It was situated on the east boundary of what are now the grounds of St Andrews school around 200 yards along Hawkhead Road from its junction with Barrhead Road. The remains of a bridge can still be seen at the pedestrian crossing at that location (next to the entrance of Dobbie's Garden Centre)
. The station was converted to a two-room and kitchen house before being dismantled by vandals in the late 1960s. The line through Dykebar from Blackbyres to Paisley East goods closed on 31 December 1960.Railway photographer Norris Forrest visited the area in February 1960 taking pictures of the station platform, a passenger shelter and a train. By observing Ross House (which is still there) behind the shelter it is possible to pinpoint the original position of the station. There is no sign of the concrete platform today, the only structure on the site being a wall. Other railway artifacts can be seen on the satellite image in the adjoining field including a bridge which would have taken trains into Hawkhead hospital. St. Andrews school is in the background.Griggs Street station
Griggs Street station (formerly Griggs Street/Long Avenue station) is a light rail station on the MBTA Green Line "B" Branch, located between the southbound travel lanes and frontage road of Commonwealth Avenue at Griggs Street in Allston, Boston, Massachusetts. The station is not accessible. It has two side platforms, located on the near sides of a pedestrian crossing, to serve the line's two tracks.Ionview stop
Ionview is a surface light rail transit (LRT) stop to be constructed on Line 5 Eglinton, a new line that is part of the Toronto subway system. It will be located in the Ionview neighbourhood at the intersection of Eglinton Avenue and Ionview Road. It is scheduled to open in 2021.
Metrolinx is planning to locate the stop in the middle of Eglinton Avenue on the west side of its intersection with Ionview Road. The stop will have parallel side platforms to be accessed from the pedestrian crossing on the west side of the signalized street intersection. As of December 5, 2015, Metrolinx says these plans are still subject to change.Long Beach Trail
The Long Beach Trail is a shared-use bicycle and pedestrian path running from Paterson River (the Patterson River Loop Trail), Carrum, along the southwestern side of the Edithvale-Seaford Wetlands, to Mordialloc Creek, Mordialloc. There, it connects with the Mordialloc Creek Trail and Bay Trail.
The Trail begins with a short downhill slope, running northbound. There, it passes a Golf Course and a Pony Club. The Long Beach Trail then passes through Bicentennial Park in Chelsea Heights. The Trail then crosses Thames Promenade via a signalised Pedestrian Crossing and continues northbound. The Trail then passes another Golf Course and crosses Edithvale Road via another signalised Pedestrian Crossing. The Trail continues through Aspendale Gardens, passing 2 schools (Aspendale Gardens Primary and St. Louis de Montford) and a yet another Golf Course. The Trail continues past the Yammerbrook Reserve, Browns Reserve, and passes Mordialloc College in Aspendale. The Long Beach Trail passes a bridge over the Mordialloc Creek, and underpasses the Frankston Train Line. The Trail continues over the Allen Bridge in Mordialloc, U-Turns and underpasses the Nepean Highway while intersecting the Mordialloc Creek Trail. The Trails then continue along Mordialloc Creek to the Mordialloc Pier, and joins up with the Bay Trail, which yields access to the City via a shared pathway.Pharmacy stop
Pharmacy is a surface light rail transit (LRT) stop to be constructed on Line 5 Eglinton, a new line that is part of the Toronto subway system. It will be located in the Golden Mile neighbourhood at the intersection of Eglinton Avenue East and Pharmacy Avenue. It is scheduled to open in 2021.
Metrolinx is planning to locate the stop in the middle of Eglinton Avenue on the east side of its intersection with Pharmacy Avenue. The stop will have parallel side platforms to be accessed from the pedestrian crossing on the east side of the signalized street intersection. As of December 3, 2015, Metrolinx says these plans are still subject to change.Plaza Viva Tijuana
Plaza Viva Tijuana is an open-air shopping center in the Empleados Federales neighborhood of Tijuana, immediately in front of what was formerly the only exit to Mexico for pedestrians crossing from San Ysidro, San Diego on the U.S. side of the border. It houses numerous pharmacies targeted at U.S. customers, handicraft and souvenir shops, restaurants, and one of Tijuana's largest gay nightclubs (formerly "Éxtasis" now "Club Fusion").It is located at what has been the exit point for pedestrians crossing southbound into Mexico via various configurations of the San Ysidro Port of Entry. In 2012, the Puerta México pedestrian crossing on the west side of the southbound vehicular crossing, controversially, closed, replaced by the new Puerta México Este pedestrian entry to Mexico on the east side. It still allowed pedestrians to walk westward 500m and exit to Tijuana in front of the Plaza, but gave pedestrians easy access to areas on the east side of the border such as the Zona Río. Business plummeted for merchants in the center, by up to 80% in one instance.In July 2016, Plaza Viva Tijuana returned to its role as a focal point for pedestrians walking from Tijuana to San Ysidro when it became the starting point of the new pedestrian walkway to and from the new PedWest pedestrian crossing, via which pedestrians cross to Virginia Avenue and the Las Americas Premium Outlets on the U.S. side. Since then, there has been a reconfiguration and the pedestrian terminus is immediately west of the Plaza, across Aves. Alberto Aldrete and José María Larroque.Portland Orange
Portland Orange is the color of light emitted by the dont walk phase of pedestrian crossing signals in the United States and Canada. The color was chosen to avoid confusion with regular traffic lights in conditions of poor visibility.Its chromaticity is specified by the Institute of Transportation Engineers in that body's technical standards, along with lunar white for the walk lights. Its application is stipulated in the U.S. federal Manual on Uniform Traffic Control Devices. Various jurisdictional standards also require Portland Orange for dont walk signs.The color can be created with some LEDs, and the ITE specifies the precision of its wavelength to 3 nanometers. In practice, the most brilliant color of gaseous tubing is similar to Portland Orange.Puffin crossing
A pedestrian user friendly intelligent crossing (puffin crossing) is a type of pedestrian crossing in use in the United Kingdom.
The design is distinct in that the lights controlling the pedestrians are on the same side of the road as the pedestrian user, rather than on the opposite side as in the older pelican crossing it replaces.
They have two sensors on top of the traffic lights (PCD pedestrian crossing detector and PKD pedestrian kerb detector). These sensors detect if pedestrians are crossing slowly and can hold the red traffic light longer if needed. If a pedestrian presses the button but then walks off, the PKD will cancel the request making the lights more efficient.Refuge island
A refuge island, also known as a pedestrian refuge, pedestrian island and colloquially as a pork chop island, is a small section of pavement or sidewalk, completely surrounded by asphalt or other road materials, where pedestrians can stop before finishing crossing a road. It is typically used when a street is very wide, as the pedestrian crossing can be too long for some individuals to cross in one traffic light cycle. They may also be seen on roads with higher speed limits. In the United Kingdom, refuge islands are commonly illuminated by a white 300 mm beacon mounted on a 5 m grey pole with white reflective bands. In 2015, a solar powered version of the refuge Beacon was introduced, requiring no mains cabling and incorporating the energy saving technology cited in patent GB2519445.
Refuge islands may also be used when no light exists and pedestrians need safe harbour after managing one direction of traffic and before taking on the next. This significantly improves amenity for pedestrians trying to cross busy streets, as they are much more likely to find two small gaps in traffic rather than one situation in which gaps for both directions coincide. Since this reduces pedestrians' average waiting time, it also improves safety, with impatient pedestrians less likely to use gaps that turn out to be too short for safe crossing.Road signs in Saudi Arabia
These road signs are used in Saudi Arabia.Road signs in the Philippines
Road signs in the Philippines are regulated and standardized by the Department of Public Works and Highways. Most of the signs reflects minor influences from American and Australian signage, but keeps close to the Vienna Convention as an original signatory.
It is unclear if the Department of Public Works and Highways mandates the use of Clearview as its official typeface for signs, but some road signs do use them.San Ysidro Port of Entry
The San Ysidro Port of Entry (aka San Ysidro Land Port of Entry or San Ysidro LPOE) is the largest land border crossing between San Diego and Tijuana, and the fourth-busiest land border crossing in the world (second-busiest if one excludes the crossings between Mainland China and its two Special Administrative Regions) with 70,000 northbound vehicles and 20,000 northbound pedestrians crossing each day, in addition to southbound traffic. It connects Mexican Federal Highway 1 on the Mexican side with Interstate 5 on the American side. The San Ysidro Port of Entry is one of three ports of entry in the San Diego–Tijuana metropolitan region.Shabbat pedestrian crossing
A Shabbat pedestrian crossing or hands-free pedestrian crossing is an automatically controlled device which allows Orthodox Jews to use pedestrian crossings on Sabbath. The first such crossing is to be installed in the north London suburb of Finchley.
The need for such a device arises for Jews who observe Sabbath laws and are prohibited from operating electrical machinery. Instead of having to press an electric button to operate the crossing system, every 90 seconds, traffic lights will automatically turn red giving a chance for pedestrians to cross.The first such device is to be installed at one of London’s busiest junctions on the North Circular, Henlys Corner. A Transport for London spokesman said "This idea was suggested by the synagogue, whose members asked if it could be done. We thought about it and came to the conclusion that it could."Similar arrangements also occur in other places. In Highland Park, New Jersey, pedestrian crossing lights cycle automatically on the Sabbath, though they are operated by buttons during the week.Westwood station (LIRR)
Westwood is a station on the Long Island Rail Road's West Hempstead Branch serving the villages of Malverne and Lynbrook, New York. The station platform is located on Foster Avenue in Malverne, with parking facilities on both the Malverne (Foster Avenue at Motley Street) and Lynbrook (Whitehall Street at Whittier Street) sides of the tracks. It has no station building other than a pair of open shelters, the larger one on the Malverne side of the tracks. It also features a gated at-grade pedestrian crossing, one of only two such stations on the Long Island Rail Road to exclusively feature such crossings, the other being Stony Brook.
No buses connect to Westwood station, however local suburban taxi cabs do stop there. A basketball court can be found on the Malverne side of the station between the platform and parking lot.Zebra crossing
A zebra crossing is a type of pedestrian crossing used in many places around the world. Its distinguishing feature is alternating dark and light stripes on the road surface, resembling the coat of a zebra. A zebra crossing typically gives priority to pedestrians.
Streets and roadways
|Types of road|
|Road safety factors|
|Space and time allocation|