Lands administrative divisions of Australia are the cadastral divisions of Australia for the purposes of identification of land to ensure security of land ownership. Most states term these divisions as counties, parishes, hundreds, and other terms. The eastern states of Queensland, New South Wales, Victoria and Tasmania were divided into counties and parishes in the 19th century, although the Tasmanian counties were renamed land districts in the 20th century. Parts of South Australia (south-east) and Western Australia (south-west) were similarly divided into counties, and there were also five counties in a small part of the Northern Territory. However South Australia has subdivisions of hundreds instead of parishes, along with the Northern Territory, which was part of South Australia when the hundreds were proclaimed. There were also formerly hundreds in Tasmania. There have been at least 600 counties, 544 hundreds and at least 15,692 parishes in Australia, but there are none of these units for most of the sparsely inhabited central and western parts of the country.
Counties in Australia have no administrative or political function, unlike those in England, the United States or Canada. Australia instead uses local government areas, including shires, districts, councils and municipalities according to the state, as the second-level subdivision.
Some other states were also divided into land divisions and land districts; in the nineteenth century, land districts sometimes served as the region name for parts of the state where counties had not been proclaimed yet. Below these are groups of land parcels known as deposited plans, registered plans or title plans (depending on the state). Queensland has registered plans; New South Wales and Western Australia have deposited plans; while Victoria has certified plans. Land can be identified using the number of this plan of subdivision held with the lands department, rather than with a named unit such as a parish (or both can be used); it is becoming increasingly common to use only the plan number. Within these are individual land parcels such as lots; in total there are estimated to be about 10.2 million of these in Australia. The various cadastral units appear on certificates of title, which are given volume and folio numbers; these numbers by themselves are sometimes used to identify land parcels, or in combination with the other units. Detailed maps of these divisions have been required since the introduction of the Torrens title system of a central register of land holdings in South Australia in 1858, which spread to the other colonies. While cadastral data since the 1980s has been digitalised, there remain many old maps showing these divisions held in collections of Australian libraries such as the National Library of Australia, as well as in state libraries.
Counties were used since the earliest British settlement in Australia, with the County of Cumberland proclaimed by Captain Phillip on 4 June 1788. In 1804 Governor King divided Van Diemen's Land into two counties; Buckingham in the south and Cornwall in the north. The parishes date to the surveys conducted after 1825, with the instructions given to Governor Brisbane on 23 Jun 1825 to divide the colony into counties, hundreds and parishes. At this time there were five counties already proclaimed in New South Wales: Cumberland, Westmoreland, Camden, Argyle and Northumberland. The Nineteen Counties in south-eastern New South Wales were the limits of location of the colony in a period after 1829, with the area outside them originally divided into districts, and later also into counties and parishes. Counties were established soon after the foundation of other Australian colonies.
Many of the counties have English names, often the names of counties in England, such as Devon, Dorset, Cornwall and Kent Counties in Tasmania. Less frequently, some have Aboriginal names such as the County of Yungnulgra in New South Wales, and County of Croajingolong in Victoria.
The use of counties, hundreds and parishes was popular in Australia in the 19th century, with many maps of Australian colonies showing these divisions, and towns and cities often listed in their county. Legal cases referenced counties, and many genealogical records for Australia in the 19th century list the county and parish for location of birth, deaths and marriages. The 1911 Britannica also describes Australian towns and cities as being in their respective county, including most of the capital cities: Melbourne, County of Bourke; Sydney, County of Cumberland; Brisbane, County of Stanley; Adelaide, County of Adelaide; and Hobart, County of Buckingham. However it is not mentioned that Perth was located in the County of Perth, as even by this time county names were infrequently used in Western Australia, where they did not cover all of the settled areas, unlike the other states. Instead the system of land divisions and land districts was used, with most of Perth located in the land districts of Swan, Canning and Cockburn Sound, all in the South West Land Division of Western Australia.
Counties and parishes are also still referenced in property law, and in industrial relations instruments, for example in a New South Wales award, which excludes people from the County of Yancowinna. Similar award examples exist in the other states and territories that have been subdivided into counties. The County of Yancowinna is also the only part of New South Wales which is in a different time zone to the rest of the state, as mentioned in the Australian Standard Time Act of 1987. Counties are also used on paperwork for mortgage securities in banks. Parishes and counties are also mentioned in definitions of electoral districts.
Counties have since gone out of use in Australia, and are rarely used or even known by most of the population today. Part of the reason is that counties are based on the size of land, rather than population, so in a large country where most of the population live in cities on the coast while the countryside has a very low population density, they have little relevance. The counties which contain the capital cities have millions of people, while those in remote areas have a very small population. The County of Adelaide, for instance, has a larger population than all the other counties in South Australia combined. Another reason is that many of the counties' borders follow rivers, having been proclaimed before settlements developed, which means that towns which typically grow up on rivers often find themselves in more than one county. Wangaratta, for instance, is located at the junction of the Ovens and King rivers, and is thus in three counties; Moira, Delatite and Bogong.
Some of the county names live on by being the same name of present-day local government areas, general region names, towns or establishments in the area. For instance, the current Shire of Plantagenet and Shire of Victoria Plains in Western Australia are in the similar area to the County of Plantagenet and County of Victoria, respectively. The modern city of Devonport in Tasmania is located in the County of Devon. Some regions do promote the county name, such as Argyle County, while the County of Cadell (roughly in the Murray Shire area) is still the name for a vineyard and motor lodge in the same area.
The land which became the Australian Capital Territory was made from land in the New South Wales counties of Murray and Cowley. This includes four former parishes of Canberra, Yarrolumla, Narrabundah and Gigerline in Murray and 15 former parishes in Cowley, while land in parts of other parishes of these counties also became part of the ACT. Also, in 1915, part of the Parish of Bherwerre in the County of St Vincent was transferred to the federal government to become the Jervis Bay Territory, which was part of the ACT until self-government in 1989. Murray lies east of the Murrumbidgee River, with all of what is now Canberra within it, with Cowley to the west of the river. Parishes and counties are not currently used in ACT titles. Instead, the Districts Act 1966 divided the ACT into 18 districts: Canberra Central (which includes Inner North and Inner South Canberra), Woden Valley, Belconnen, Jerrabomberra, Majura, Tuggeranong, Weston Creek, Gungahlin, Stromlo, Kowen, Hall, Coree, Paddys River, Cotter River, Tennent, Rendezvous Creek, Booth and Mount Clear. The parts of these located in Canberra itself are divided into divisions (i.e. suburbs), sections and blocks. For example, the National Library of Australia is located in Section 27, Blocks 4, 5 and 8, Division of Parkes, District of Central Canberra
There are 141 counties and 7,459 parishes within New South Wales. The County of Cumberland, in which Sydney is located, has the largest population. The original Nineteen Counties were the limits of settlement in the early part of the 19th century. Legal documents describe the Lot number, Deposited Plan number, Parish and County. For example, the Sydney Opera House is described as being in Lot 5 in Deposited Plan 775888 at Bennelong Point, Parish of St. James, County of Cumberland, city of Sydney Note that the land administration counties are not the same as the county councils that have been used to administer water and electricity, such as the Goldenfields Water County Council. or Central Tablelands County Council which do not correspond with a land administration county. However, there have been some land administration counties which did have county councils: Cumberland (1945–63), Northumberland (1948–63) and Rous (1940-pres., with trading name of Rous Water
There were only five counties in the Northern Territory, which were divided into hundreds.
Darwin is located in the Hundred of Bagot in the Palmerston County: usually only the hundred name, not the county, is mentioned. This is divided into sections. An example of the way locations are described for Darwin is Darwin International Airport listed as being in "Section 3381, Hundred of Bagot from plan LT089/067A"  In Alice Springs, where there are no hundreds or counties, legal documents give the lot number, town and plan number, for example "Lot 8721 Town of Alice Springs, plan(s) LTO96/016"
There are currently 322 counties in Queensland, subdivided into 5,319 parishes. In the 19th century there were 109 counties, which were later divided into 319 in 1901. The counties which contain the largest population are those on the east coast with the County of Stanley containing Brisbane; the County of Ward containing the Gold Coast and the County of Canning containing Caboolture. Several of these were counties in New South Wales before Queensland became a separate colony in 1859. Legal documents list the Lot number, Registered Plan number, County and Parish. For instance, government land near the Brisbane Cricket Ground described as "Lot 2 on Registered Plan B31553, County of Stanley, Parish of South Brisbane". In 2006, the Queensland Department of Natural Resources, Mines and Water was considering abolishing Counties and Parishes and using only Lot and Plan numbers to identify parcels of land.
There are 49 counties in South Australia, mostly in the south-east part of the state. All except 3 of the counties are subdivided into a total of 535 Hundreds. 5 further Hundreds proclaimed between 1853 and 1860 were annulled in 1870. Additionally, 10 Hundreds with names of German origin were renamed after Allied commanders or battles in 1918, 8 of these 10 had been slated for renaming in 1916, but the Aboriginal names suggested at the time were rejected. At various times 3 other Hundred names were proposed but never adopted. All 561 (535+5+10+8+3) current, obsolete or proposed Hundred names are listed in South Australia's official online gazetteer Placenames Online. The city of Adelaide is located in the Hundred of Adelaide in the County of Adelaide. The County of Adelaide held at least 60% of South Australia's population between 1855 and 1921; the figure rose to 70.6% in 1966. All of the existing counties had been proclaimed by 1900, except for Le Hunte (proclaimed 1908), Bosanquet (proclaimed 1913), and Hore-Ruthven (proclaimed 1933). Parcels of land in most residential areas are identified with the Deposited Plan or Filed Plan number with an allotment number, for example: "Allotment 20 in Deposited Plan (DP) 11270". In many rural areas and historically in residential areas, land is described with the Section number, hundred and county, for example "Section 53, Hundred of Borda, County of Carnarvon", or the allotment number within government towns. Sometimes a combination is used, such as "allotment 1 (DP 25326), Hundred of Munno Para". Often only the hundred name is used, not the county, as each hundred has a unique name making the county name redundant.
Tasmania is divided into 20 land districts, subdivided into 480 parishes. These include the former 18 counties, which were renamed land districts and retained the same borders. In addition Flinders Island and King Island are now also districts. In the nineteenth and early twentieth century Tasmania had 18 counties. The original counties were divided into hundreds (containing four parishes) but this distinction was seldom observed . Legal documents list Lot numbers, Plan numbers, Parishes and Land Districts. For example, "Lot No. 2 on Plan No. P.14486, Parish of Sorell, Land District of Pembroke" 
The cadastral divisions of Victoria are called counties and parishes. Victoria is divided into 37 counties, roughly 40 x 40 miles in size, subdivided into 2,914 parishes. Parishes were subdivided into sections of various sizes for sale as farming allotments, or designated as a town and then divided into sections and these subdivided into crown allotments. However, many parishes do not follow county borders, some being located in more than one county.
The county with the largest population is the County of Bourke, which contains Melbourne. Legal documents can describe the County, Parish, Township (if there is one), Section, Crown Allotment number, and Certified Plan number. For example: "County of Dalhousie, Parish of Lauriston, being 2 hectares, being Crown Allotment 2, Section 40" or "Parish of Ballarat, County of Grant.. Crown Allotment 29, Section 101, Township of Ballarat East.. as shown on Certified Plan No. 105127" 
At the start of the 20th century, Western Australia had six land divisions which cover the whole state, divided into 80 land districts. The land districts were further subdivided into locations and lots. Western Australia also had 26 counties, all located in the south-west corner of the state, around Perth. The counties were designated in 1829, the year of the foundation of the Swan River Colony, with Governor Stirling instructing that counties were to be approximately 40 miles square (1,600 square miles). The counties appear on some nineteenth century maps of Australia along with counties in other states, however it was the land districts which were used for cadastral purposes, and were the equivalent of the counties used in the eastern states. Around the end of the twentieth century, legal documents usually wrote them in the order: land district, location, number. For example: "Swan Location 2301". These are further divided into lots. More recently, Western Australia uses only the lot and deposited plan numbers, such as "Lot 853 on Deposited Plan 222626".
Cadastral divisions in Victoria are called counties, which are further subdivided into parishes and townships, for cadastral or land administration purposes. Cadastral divisions of county, parish and township form the basis for formal identification of the location of any piece of land in the state. There are 37 counties and 2004 parishes and 909 townships. Parishes were subdivided into sections of various sizes for sale as farming allotments, or designated as a town and then divided into sections and these subdivided into crown allotments. However, many parishes do not follow county borders, some being located in more than one county.
Counties in Victoria, Australia were gazetted in stages between 1849 and 1871 as Victoria was progressively opened up to British settlement. All parish boundaries were gazetted by 1890.
In addition to identification of particular parcels of land by county, parish and other names, such parcels are also usually identified by reference to a lot number of a particular plan of subdivision or other certified plan or survey. Legal documents (such as grants, titles or transfers) that describe a particular parcel of land do so by reference to the county, parish, township (if there is one), section, crown allotment number, and certified plan number — for example: "County of Dalhousie, Parish of Lauriston, being 2 hectares, being Crown Allotment 2, Section 40"; or
"Parish of Ballarat, County of Grant, Crown Allotment 29, Section 101, Township of Ballarat East, as shown on Certified Plan No. 105127" Under streamlined rules of the Torrens title in Australia, a parcel of land on a transfer, etc. can now be described by reference to the relevant volume-folio number on the Land Register, which is itself based on the cadastral descriptions described above. When searching for title details, for example online, searching by street address is also often available. In each case, titles continue to be based on the original cadastral descriptions.
Unlike counties in the United States and the United Kingdom, Victoria's counties have no administrative or political function, but the boundaries for Victorian forecast districts are based on county boundaries. County names have traditionally been used as names for Victorian electoral districts, although the boundaries of these districts seldom coincided with county boundaries.County of Bourke, Victoria
The County of Bourke is one of the 37 counties of Victoria which are part of the Lands administrative divisions of Australia, used for land titles. It is the oldest and most populous county in Victoria and contains the city of Melbourne. Like other counties in Victoria, it is subdivided into parishes. The county was named after General Sir Richard Bourke, the Governor of New South Wales between 1831 and 1837. It is bordered by the Werribee River in the west, the Great Dividing Range in the north, Port Phillip in the south, and by Dandenong Creek, a small part of the Yarra River, and the Plenty River in the east. The county was proclaimed in 1853.
Unlike counties in England and in the United States, Australian counties serve no administrative or political function. Rather, counties exist for purposes of land ownership. For example, property titles in Lands administrative divisions of Australia are often listed as being situated within a parish and county. For political subdivisions, Australia employs the Local Government Area (LGA) system — which includes shires, districts, and city councils — as the third and lowest tier of government (the States and territories of Australia being the second tier and the Federal Government being the highest tier).
The Melbourne and County of Bourke Police was the name for the police force in the area before 1853. The County of Bourke was used on the name of the electoral roll in 1845. There was also the Bourke County Court in the 1850s, which became the County Court of Victoria. Melbourne is also referenced as being in "Bourke county" in the Encyclopædia Britannica Eleventh Edition.County of Malmesbury
County of Malmesbury was one of the five counties in the Northern Territory which are part of the Lands administrative divisions of Australia.
This County, in the Daly River area, lapsed with the passage in 1976 and assent of the Crown Lands Ordinance 1976 (No 1 of 1977) and the Crown Lands (Validation of Proclamations) Ordinance 1976 (No.2 of 1977).Franklin Land District
Franklin Land District is one of the twenty land districts of Tasmania which are part of the Cadastral divisions of Tasmania. It used to be Franklin County, one of the 18 counties of Tasmania. Frenchmans Cap mountain is located there. It includes most of the Franklin-Gordon Wild Rivers National Park.Lands administrative divisions of New South Wales
The lands administrative divisions of New South Wales refers to the 141 counties within the Colony of New South Wales, that later became the Australian state of New South Wales.
The counties were further subdivided into 7,419 parishes. There are also three land divisions, approximately one hundred land districts, and several other types of districts as well as land boards used at various periods. There were also thirteen hundreds proclaimed in Cumberland County, which were later abolished. These divisions are part of the lands administrative divisions of Australia. Unlike the local government areas of New South Wales, which have gone through restructuring periods by the government, the counties have been the same since the nineteenth century.Lands administrative divisions of Queensland
Lands administrative divisions of Queensland refers to the divisions of Queensland used for the registration of land titles. There are 322 counties, and 5,319 parishes within the state. They are part of the Lands administrative divisions of Australia. Queensland had been divided into 109 counties in the nineteenth century, before the Land Act of 1897 subdivided many of these counties to 319. Some of the eastern counties remained the same, with most of the subdivisions occurring in the west and north. The current counties were named and bounded by the Governor in Council on 7 March 1901.In 2006, the government sought advice about a plan to abolish the counties and parishes within the state. From 30 November 2015, the government no longer referenced counties and parishes in land information systems however the Museum of Lands, Mapping and Surveying retains a record for historical purposes.Lands administrative divisions of Tasmania
The Lands administrative divisions of Tasmania are the divisions of Tasmania into land districts and parishes for cadastral purposes, which are part of the lands administrative divisions of Australia. There are 20 land districts in Tasmania, although in the early nineteenth century there were several other systems, with 18 or 36 counties and 9 other divisions used, as well as hundreds. The land districts include the 18 former counties of the island of Tasmania which were renamed but retain the same boundaries, plus King Island and Flinders Island. The counties are referenced in the 1911 Encyclopædia Britannica, with Hobart described as being in Buckingham County, Launceston in Cornwall County and Beaconsfield in Devon County. The land districts are used for land titles today, while the Local Government Areas of Tasmania with cities and municipalities are used for political and administrative purposes.Lands administrative divisions of Western Australia
The lands administrative divisions of Western Australia refer to subdivisions of the state of Western Australia for cadastral (land title) purposes, most of which have been in place since the 19th century. The state is divided up for this purpose into five land divisions, which in turn are subdivided into land districts, which correspond to counties in other Australian states. These districts are then subdivided further into numbered locations, as well as gazetted townsites. Together, they form part of the lands administrative divisions of Australia.Palmerston County
Palmerston County is one of the five counties in the Northern Territory which are part of the Lands administrative divisions of Australia. It contains the city of Darwin. It was proclaimed on 14 September 1871 and divided into hundreds. Being on the northern coast of the territory, it is bounded on the north and west by sea, the Adelaide River on the east and on the south by a line at longitude approximately 13°15' south (from a point adjacent to the southernmost of the Peron Islands to the township of Adelaide River).
Lands administrative divisions of Australia