Other undefinedLetter Number Punctuation Symbol
ASCII ( (listen) ASS-kee), abbreviated from American Standard Code for Information Interchange, is a character encoding standard for electronic communication. ASCII codes represent text in computers, telecommunications equipment, and other devices. Most modern character-encoding schemes are based on ASCII, although they support many additional characters.
ASCII is the traditional name for the encoding system; the Internet Assigned Numbers Authority (IANA) prefers the updated name US-ASCII, which clarifies that this system was developed in the US and based on the typographical symbols predominantly in use there.ASCII is one of the IEEE milestones.CER-GS
CER-GS (Celtic Extended Roman GS) is a character encoding for Windows CeltScript fonts. It is deprecated by Extended Latin-8, which contains the euro and disunifies the ampersands (both of these were done in an August 1998 update of Extended Latin-8).Character encoding
Character encoding is used to represent a repertoire of characters by some kind of encoding system. Depending on the abstraction level and context, corresponding code points and the resulting code space may be regarded as bit patterns, octets, natural numbers, electrical pulses, etc. A character encoding is used in computation, data storage, and transmission of textual data. "Character set", "character map", "codeset" and "code page" are related, but not identical, terms.
Early character codes associated with the optical or electrical telegraph could only represent a subset of the characters used in written languages, sometimes restricted to upper case letters, numerals and some punctuation only. The low cost of digital representation of data in modern computer systems allows more elaborate character codes (such as Unicode) which represent most of the characters used in many written languages. Character encoding using internationally accepted standards permits worldwide interchange of text in electronic form.Charset detection
Character encoding detection, charset detection, or code page detection is the process of heuristically guessing the character encoding of a series of bytes that represent text. The technique is recognised to be unreliable and is only used when specific metadata, such as a HTTP Content-Type: header is either not available, or is assumed to be untrustworthy.
This algorithm usually involves statistical analysis of byte patterns, like frequency distribution of trigraphs of various languages encoded in each code page that will be detected; such statistical analysis can also be used to perform language detection. This process is not foolproof because it depends on statistical data.
In general, incorrect charset detection leads to mojibake.
One of the few cases where charset detection works reliably is detecting UTF-8. This is due to the large percentage of invalid byte sequences in UTF-8, so that text in any other encoding that uses bytes with the high bit set is extremely unlikely to pass a UTF-8 validity test. However, badly written charset detection routines do not run the reliable UTF-8 test first, and may decide that UTF-8 is some other encoding. For example, it was common that web sites in UTF-8 containing the name of the German city München were shown as MÃ¼nchen.
UTF-16 is fairly reliable to detect due to the high number of newlines (U+000A) and spaces (U+0020) that should be found when dividing the data into 16-bit words, and the fact that few encodings use 16-bit words. This process is not foolproof; for example, some versions of the Windows operating system would mis-detect the phrase "Bush hid the facts" (without a newline) in ASCII as Chinese UTF-16LE.
Charset detection is particularly unreliable in Europe, in an environment of mixed ISO-8859 encodings. These are closely related eight-bit encodings that share an overlap in their lower half with ASCII. There is no technical way to tell these encodings apart and recognising them relies on identifying language features, such as letter frequencies or spellings.
Due to the unreliability of heuristic detection, it is better to properly label datasets with the correct encoding. HTML documents served across the web by HTTP should have their encoding stated out-of-band using the Content-Type: header.
An isolated HTML document, such as one being edited as a file on disk, may imply such a header by a meta tag within the file:
or with a new meta type in HTML5
If the document is Unicode, then some UTF encodings explicitly label the document with an embedded initial byte order mark (BOM).Code page 1287
Code page 1287, also known as CP1287, DEC Greek (8-bit) and EL8DEC, is one of the code pages implemented for the VT220 terminals. It supports the Greek language.Code page 1288
Code page 1288, also known as CP1288, DEC Turkish (8-bit) and TR8DEC, is one of the code pages implemented for the VT220 terminals. It supports the Turkish language.ISO/IEC 2022
ISO/IEC 2022 Information technology—Character code structure and extension techniques, is an ISO standard (equivalent to the ECMA standard ECMA-35) specifying
a technique for including multiple character sets in a single character encoding system, and
a technique for representing these character sets in both 7 and 8 bit systems using the same encoding.Many of the character sets included as ISO/IEC 2022 encodings are 'double byte' encodings where two bytes correspond to a single character. This makes ISO-2022 a variable width encoding. But a specific implementation does not have to implement all of the standard; the conformance level and the supported character sets are defined by the implementation.ISO/IEC 6937
ISO/IEC 6937:2001, Information technology — Coded graphic character set for text communication — Latin alphabet, is a multibyte extension of ASCII, or rather of ISO/IEC 646-IRV. It was developed in common with ITU-T (then CCITT) for telematic services under the name of T.51, and first became an ISO standard in 1983. Certain byte codes are used as lead bytes for letters with diacritics (accents). The value of the lead byte often indicates which diacritic that the letter has, and the follow byte then has the ASCII-value for the letter that the diacritic is on. Only certain combinations of lead byte and follow byte are allowed, and there are some exceptions to the lead byte interpretation for some follow bytes. However, there are no combining characters at all are encoded in ISO/IEC 6937. But one can represent some free-standing diacritics, often by letting the follow byte have the code for ASCII space.
ISO/IEC 6937's architects were Hugh McGregor Ross, Peter Fenwick, Bernard Marti and Loek Zeckendorf.
ISO6937/2 defines 327 characters found in modern European languages using the Latin alphabet. Non-Latin European characters, such as Cyrillic and Greek, are not included in the standard. Also, some diacritics used with the Latin alphabet like the Romanian comma are not included, using cedilla instead as no distinction between cedilla and comma below was made at the time.
IANA has registered the charset names ISO_6937-2-25 and ISO_6937-2-add for two (older) versions of this standard (plus control codes). But in practice this character encoding is unused on the Internet.
The ISO/IEC 2022 escape sequence to specify the right-hand side of the ISO/IEC 6937 character set is ESC - R (hex 1B 2D 52).ISO/IEC 8859-11
ISO/IEC 8859-11:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin/Thai. It is nearly identical to the national Thai standard TIS-620 (1990). The sole difference is that ISO/IEC 8859-11 allocates non-breaking space to code 0xA0, while TIS-620 leaves it undefined. (In practice, this small distinction is usually ignored.)
ISO-8859-11 is not a main registered IANA charset name despite following the normal pattern for IANA charsets based on the ISO 8859 series. However, it is defined as an alias of the close equivalent TIS-620 (which lacks the non-breaking space), and which can without problems be used for ISO/IEC 8859-11, since the no-break space has a code which was unallocated in TIS-620. Microsoft has assigned code page 28601 a.k.a. Windows-28601 to ISO-8859-11 in Windows. A draft had the Thai letters in different spots.As with all varieties of ISO/IEC 8859, the lower 128 codes are equivalent to ASCII. The additional characters, apart from no-break space, are found in Unicode in the same order, only shifted from 0xA1 to U+0E01 and so forth.
The Microsoft Windows code page 874 as well as the code page used in the Thai version of the Apple Macintosh, MacThai, are extensions of TIS-620 — incompatible with each other, however.ISO/IEC 8859-12
ISO/IEC 8859-12 would have been part 12 of the ISO/IEC 8859 character encoding standard series.
ISO 8859-12 was originally proposed to support the Celtic languages. ISO 8859-12 was later slated for Latin/Devanagari, but this was abandoned in 1997, during the 12th meeting of ISO/IEC JTC 1/SC 2/WG 3 in Iraklion-Crete, Greece, 4 to 7 July 1997. The Celtic proposal was changed to ISO 8859-14.ISO/IEC 8859-14
ISO/IEC 8859-14:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 8 (Celtic), is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-8 or Celtic. It was designed to cover the Celtic languages, such as Irish, Manx, Scottish Gaelic, Welsh, Cornish, and Breton.
ISO-8859-14 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. CeltScript made an extension for Windows called Extended Latin-8. Microsoft has assigned code page 28604 a.k.a. Windows-28604 to ISO-8859-14.ISO/IEC 8859-16
ISO/IEC 8859-16:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No. 10, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin-10 or South-Eastern European. It was designed to cover Albanian, Croatian, Hungarian, Polish, Romanian, Serbian and Slovenian, but also French, German, Italian and Irish Gaelic (new orthography).
ISO-8859-16 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429.
Microsoft has assigned code page 28606 a.k.a. Windows-28606 to ISO-8859-16.ISO/IEC 8859-3
ISO/IEC 8859-3:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-3 or South European. It was designed to cover Turkish, Maltese and Esperanto, though the introduction of ISO/IEC 8859-9 superseded it for Turkish. The encoding remains popular with users of Esperanto, though use is waning as application support for Unicode becomes more common.
ISO-8859-3 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. Microsoft has assigned code page 28593 a.k.a. Windows-28593 to ISO-8859-3 in Windows. IBM has assigned code page 913 to ISO 8859-3.ISO/IEC 8859-8
ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings. ISO/IEC 8859-8:1999 from 1999 represents its second and current revision, preceded by the first edition ISO/IEC 8859-8:1988 in 1988. It is informally referred to as Latin/Hebrew. ISO/IEC 8859-8 covers all the Hebrew letters, but no Hebrew vowel signs. IBM assigned code page 916 to it. This character set was also adopted by Israeli Standard SI1311:2002.
ISO-8859-8 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. The text is (usually) in logical order, so bidi processing is required for display. Nominally ISO-8859-8 (code page 28598) is for “visual order”, and ISO-8859-8-I (code page 38598) is for logical order. But usually in practice, and required for XML documents, ISO-8859-8 also stands for logical order text. The WHATWG Encoding Standard used by HTML5 treats ISO-8859-8 and ISO-8859-8-I as distinct encodings with the same mapping due to influence on the layout direction, but notes that this no longer applies to ISO-8859-6 (Arabic), only to ISO-8859-8.There is also ISO-8859-8-E which supposedly requires directionality to be explicitly specified with special control characters; this latter variant is in practice unused.
The Microsoft Windows code page for Hebrew, Windows-1255, is mostly an extension of ISO/IEC 8859-8 without C1 controls, except for the ommission of the double underscore, and replacement of the generic currency sign (¤) with the sheqel sign (₪). It adds support for vowel points as combining characters, and some additional punctiation.
Over a decade after the publication of that standard, Unicode is preferred, at least for the Internet (meaning UTF-8, the dominant encoding for web pages). ISO-8859-8 is used by less that 0.1% of websites.ISO/IEC 8859-9
ISO/IEC 8859-9:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1989. It is informally referred to as Latin-5 or Turkish. It was designed to cover the Turkish language, designed as being of more use than the ISO/IEC 8859-3 encoding. It is identical to ISO/IEC 8859-1 except for these six replacements of Icelandic characters with characters unique to the Turkish alphabet:
ISO-8859-9 is the IANA preferred charset name for this standard when supplemented with the C0 and C1 control codes from ISO/IEC 6429. In modern applications Unicode and UTF-8 are preferred. 0.1% of all web pages use ISO-8859-9 in February 2016.Microsoft has assigned code page 28599 a.k.a. Windows-28599 to ISO-8859-9 in Windows. IBM has assigned Code page 920 to ISO-8859-9.Lotus International Character Set
The Lotus International Character Set (LICS) is a proprietary single-byte character encoding introduced in 1985 by Lotus Development Corporation. It is based on the 1983 DEC Multinational Character Set (MCS) for VT220 terminals. As such, LICS is also similar to two other descendants of MCS, the ECMA-94 character set of 1985 and the ISO 8859-1 (Latin-1) character set of 1987.
LICS was first introduced as the character set of Lotus 1-2-3 Release 2 for DOS in 1985. It is also utilized by 2.01, 2.2, 2.3 and 2.4 as well as by Symphony. It was also utilized in a number of third-party spreadsheet products emulating the file format. LICS was superseded by the Lotus Multi-Byte Character Set (LMBCS) introduced by Lotus 1-2-3 Release 3 in 1989.National Replacement Character Set
The National Replacement Character Set, or NRCS for short, was a feature supported by later models of Digital's (DEC) computer terminal systems, starting with the VT200 series in 1983. NRCS allowed individual characters from one character set to be replaced by one from another set, allowing the construction of different character sets on the fly. It was used to customize the character set to different local languages, without having to change the terminal's ROM for different counties, or alternately, include many different sets in a larger ROM. Many 3rd party terminals and terminal emulators supporting VT200 codes also supported NRCS.
|MacOS code pages("scripts")|
|DOS code pages|
|IBM AIX code pages|
|IBM Apple MacIntoshemulations|
|IBM Adobe emulations|
|IBM DEC emulations|
|IBM HP emulations|
|Windows code pages|
|EBCDIC code pages|
|Unicode / ISO/IEC 10646|
|TeX typesetting system|
|Miscellaneous code pages|